Instructions & FAQs for Carbon+ EMF Harmonizer Chip
Installing the Carbon+ Chip
On a cell phone:
- The Carbon+ Chip should be placed on the back of your cell phone. It may be affixed to the phone with the adhesive backing, or if you use a cell phone case you can simply place it between the case and the phone (with the top facing out from the phone). To expose the adhesive backing, peel off the piece of white film on the back. If it won't fit between the phone and case, it is okay to stick it to the outside of the case.
- The ideal location is near the bottom of the back side, underneath any case you may have. Having a case covering it will not impact the effectiveness of the chip. If the case is secure and you don't remove it much then you don't have to use the adhesive backing, you can simply leave the chip pressed between the phone and the case. This makes it easier to move to another phone in the future.
- If you use a wireless charging station, it is important to put it near the bottom on the back of the phone and not in the center so that it does not interfere with the charging function.
Wireless devices like laptop, tablet, computer, monitor, Smart TV, small appliance, and wireless speaker:
- Use 1 per device
- Attach the Carbon+ EMF Harmonizer Chip to your wireless device by removing the adhesive backing on the chip and placing the chip in any location on the device. It's not important whether the chip is on the top, bottom, side, etc., as long as it's on the device itself.
- If you plan on reusing the chip on a different device, attaching it with tape is fine and may allow you to more easily remove and repurpose it.
- If your wireless device has a case, for example on an iPad or tablet, it's okay for the chip to be covered by the case. It will not interfere with the effectiveness of the Carbon+ EMF Harmonizer Chip.
WiFi router, WiFi extender, utility smart meter, induction cooktop, microwave oven, smart home hub:
- Use 2 per device
- Attach the Carbon+ EMF Harmonizer Chips by removing the adhesive backing on the chips and placing them in an inconspicuous location on the device.
- If you plan on reusing the chip on a different device, attaching it with tape is fine and may allow you to more easily remove and repurpose it.
- On a WiFi router, extender, or booster place two chips anywhere on the device - top, side, or bottom.
- On an induction cooktop place two chips on the front near the controls, or on the top in a corner.
- On a microwave oven place two chips anywhere on the top or side of the oven.
- On a utility smart meter, place two chips on a flat surface, ideally not on the glass. If the glass front is the only flat surface, then you may place it there.
- On a smart home hub place two chips on any flat surface on the main device - top, side, or bottom.
Frequently Asked Questions
Can I move the Carbon+ Chip to a new device?
- Yes, it can be moved to a new device. If you used the adhesive to stick it to your device, in most cases you can remove it by carefully using a razor blade or knife to pry/scrape it off, and the adhesive backing will generally still be sticky. Depending on the surface it was stuck to and the amount of time it was there in may not be possible to remove it without damaging it. You may also simply place the chip between your device and a case if applicable.
What is the difference between the Carbon+ Chip and the Harmonizer, Harmonizer+, and Harmonizer Ultra?
- The EMF Harmony products are designed for specific devices - namely the Ultra for a Wi-Fi router, the Harmonizer+ for a cell phone, and the Harmonizer for other wireless devices. The Carbon+ Chip will work on all of these devices, but for some you will need two chips, per the instructions above. There is no significant difference in the effectiveness of the products, but due to the nature of the carbon material the Carbon+ Chip has a different look, is slightly more durable, and has slightly better grounding properties.
How long will the Carbon+ Chip last?
- The product will work effectively indefinitely, but the technology is updated regularly. Given the rapid pace of technological change today, we recommend replacing it approximately every five years.
How many Carbon+ Chips come in each box?
- Each box contains one sticker.
If I have the Carbon+ Chip do I still need the other products?
-
The Carbon+ Chip is not designed to replace the other devices, as the different devices have different areas of focus. The primary focus of the chip is to harmonize the electromagnetic radiation of the device to which it is attached. The purpose of our EMF protection jewelry is to support your body when you are moving around in the world so that it can better manage the stress of EMF exposure. In the case of the Home & Office and EMF Harmonizer Car, a protected field is created where all people (and pets) are protected through a combination of harmonizing the EMF radiation and support for the body.
Since all of the products work together synergistically, for maximum protection you would ultimately add all of the products. This is especially true if you live in an area with high EMF exposure, such as an area where 5G technology has been deployed.
